EDH6300DGYWIFI 30L 5-IN-1 DUAL LOUVRE DEHUMIDIFIER WITH HEPA AIR PURIFIER

Made for Singapore

Singapore, having a tropical climate, has a very high humidity level (~80%). Allergens such as mould, dust mites and bacteria thrive in such environment. This 30L Dual Louvre Dehumidifier is designed to for Enhanced Dehumidification. Its space-saving design makes it a Top Selling Choice for homes in Singapore, providing powerful moisture control without taking up too much room.

30L/Day Moisture Removal

This dual louvre dehumidifier covers an area coverage up to 930sqft, roughly the size of a Full Apartment Size. It effectively absorbs excess moisture and quickly reduces the humidity of your indoor space.

Dual Louvers for Enhanced Dehumidification

The Top and Bottom Louvers allow you to adjust the direction of the wind. You can direct the wind at your laundry at your preferred angle. Enjoy more efficient and powerful dehumidification with dual air outlets.

HEPA Filter + Washable Nylon Pre-Filter

The HEPA filter, traps up to 99% of 0.3 micron particles, including allergens, pollen and dust mites. Improve your air quality and comfort by reducing airborne irritants for sensitive individuals.

Quickly Dry clothes without damaging them.

Equipped with Laundry Drying Preset Mode that dries your laundry quickly by blowing air on it and reducing musty odours caused by slow and improper drying when drying laundry indoors.

Tip: Use Laundry Drying Preset Mode with the Continuous Drain Hose that is included for Laundry Drying Function.

Thoughtful Water Tank Design

The tank is equipped with a Tank Handle, Cover, and Spill Guard, and can be pulled out from the main unit for easy drainage. The Water Tank design prevents accidental spills during water drainage.

Frequently Asked Questions

Where can I use the dehumidifier?

The dehumidifier is designed for indoor use only. For best results, place it on a smooth, level and stable surface that can safely support the unit when the water tank is full.

It is particularly suitable for areas with excess moisture, such as:

Laundry rooms
Bathrooms
Kitchens
Basements
Other enclosed areas where moisture or condensation is a concern

Can I use the dehumidifier outdoors?

No. This dehumidifier is intended for indoor use only.

Can there be water in the tank when I first use the dehumidifier?

Yes. You may notice a small amount of water in the tank when using the dehumidifier for the first time. This can occur as a result of product inspection during the manufacturing process and is normal.

Can I place the dehumidifier in direct sunlight?

Keep the dehumidifier away from direct sunlight and other sources of heat.

How do I use Continuous Drainage?

Water can be automatically emptied into a floor drain or bucket by connecting the standard 1 meter drain pipe at the back of the unit.

Note:
• The water tank must be installed in place when using continuous drainage, otherwise the dehumidifier will not work.
•The height of the end of the drain pipe must be more than 10cm below the height of the fuselage outlet. Ensure the hose slopes downward from the main unit and avoid any bending or upward slope. The drain pipe must be kept smooth, otherwise the water may not be drained normally.

How do I install the HEPA + Carbon Filter?

Installing the HEPA + Carbon Filter is quick and easy:

1. Remove the air intake grille from the rear of the dehumidifier.
2. Remove all packaging from the filter and fit the HEPA + Carbon Filter into the rear panel.
3. Reattach the air intake grille.

Please note: Using the HEPA + Carbon Filter may slightly reduce dehumidification performance. You can choose whether to use the filter when operating the dehumidifier in dehumidification mode.

Why is the dehumidifier not operating properly or stops running suddenly?

If the water collection tank is full, the dehumidifier may automatically shut off to prevent water overflow. Empty the water tank and ensure it is properly reinstalled.

While the dehumidifier may currently be in "Dehumidification Mode" it cannot effectively operate when the ambient temperature falls below 5°C or exceeds 35°С.

Why isn't the water flowing properly to the drainage facility during continuous hose drainage, or why is it flowing into the tank instead?

Water may not flow properly to the drainage facility, or it might flow into the tank instead, due to a loose or clogged hose, improper hose placement, excessive hose length, insufficient elevation difference, a blocked drainage port, or malfunctioning internal components. Ensure the hose secure, clear, and correctly positioned.

Please click → here ← to download the user manual.